Brother IntelliFAX 4100e - Manual (Page 50)

4 - 2 I N I T I A L S E T U P
Setting Cassette Usage
The default setting of AUTO allows your machine to choose the optional
Cassette #2 if paper is out in Cassette #1 or if incoming faxes will fit best on the
paper in Cassette #2. Choose
CASSETTE#1 ONLY , CASSETTE#2 ONLY or
AUTO if you want to keep special paper in the other cassette and control when
it is used.
1
Press Menu, 1, 1.
2
Press or to select CASSETTE USAGE , and then press Set.
3
To set cassette usage for faxes, press or to select FOR FAX , and then
press Set.
—OR— To set cassette usage for copies, press or to select FOR COPY ,
and then press Set.
—OR— If you are finished go to Step 5.
4
Press or to select AUTO, CASSETTE#1 ONLY or CASSETTE#2
ONLY , and then press Set.
5
Press Stop/Exit.
Setting Date and Time
Your machine displays the date and time, and prints it on every fax you send.
In the event of a power failure, you may have to reset the date and time. All other
settings remain unaffected.
1
Press Menu, 1, 2.
2
Enter the last two digits of the year, and then
press Set.
3
Enter two digits for the month and press Set.
(For example, enter 09 for September, or 10
for October).
4
Enter two digits for the day, and then press
Set. (For example, 06).
5
Enter the time in 24-hour format, and then
press Set. (For example, enter 15:25 for 3:25
PM).
6
Press Stop/Exit.
The screen now shows the date and time you set whenever the machine is in
standby mode.
2 . D A T E / T I M E
Y E A R : X X
E N T E R & S E T K E Y
M O N T H : X X
E N T E R & S E T K E Y
D A Y : X X
E N T E R & S E T K E Y
T I M E : X X : X X
E N T E R & S E T K E Y