TerraWave BTRM-200 - Manual (Page 9)

VENTEV INNOVATIONS BTRM200 Battery Test Remote Monitoring System – User Guide V1.0
9
You will need the following information from your network administrator to add the
BTRM to your IP Network:
 IP Address – we recommend using a static IP address for the BTRM
 Gateway – what is the IP address of the Gateway of your network
 Subnet Mask – what is the mask of your network
 Primary DNS – IP address of the primary DNS server for your network
Once you have your connection made to you laptop or PC you will need to record your
IP address and verify connection to the BTRM.
NOTE: It may be necessary to give your PC or Laptop a static address to access the BTRM
default network.
Example: IP Address: 192.168.1.200
Subnet mask: 255.255.255.0
Use the following screen shots to guide you into finding your IP address and record your
address for use later.
1. Click Start and then Run.
2. In the window type cmd and click OK.