TerraWave BTRM-200 User Manual
Page 15
VENTEV INNOVATIONS BTRM200 Battery Test Remote Monitoring System – User Guide V1.0
15
7.1.3. Battery Current
This is the measurement of the battery current.
Negative battery current
Battery is powering the load.
Positive battery current
Battery is being charger by battery charger.
7.1.4. Supply Voltage
This is the measurement of power supply voltage.
7.1.5. System Temperature
This is the measurement of the enclosure temperature.
7.1.6. Capacity
This is the measurement of the battery’s capacity level. This reading is present
after the first test is completed.
7.1.7. IO Channel 1 – Analog V
This is the measurement of the voltage present across contact number 1.
7.1.8. IO Channel 1 – Digital In
This is the logic setting for IO Channel 1 (see port options menu).
TRUE
The logic level voltage for the port has been met. An alarm
message has been sent.
FALSE
The logic level voltage for the port has not been met. No alarm
message has been sent.
7.1.9. IO Channel 1 – Digital Out
This indicates that the IO Channel 1 relay has been set to indicate a battery
relate fault (see port options menu).
OFF
The relay is set for normal operation.
ON
The relay is set to indicate a battery fault as diagnosed by the
BTRM.