TerraWave BTRM-200 User Manual
Page 27
VENTEV INNOVATIONS BTRM200 Battery Test Remote Monitoring System – User Guide V1.0
27
7.8.3. Communications Interface
7.8.3.1.
TCP/IP
Configurable :TCP/IP Port (Default 20000)
Configurable: TCP/IP Unsolicited message destination IP address
7.8.3.2.
RS232
BTRM supports a 3 wire RS232 using standard connections on DB9
connector.
Baud Rates: Selectable 9600, 19200
Format: Data 8 bits, No Parity, Stop Bits 1
7.9. SNMP Configuration Page
Setting the community strings provides SNMP with basic password protection. User has
a choice of 3 read only and 3 write only strings. Most SNMP browsers are configured to
use the typical default strings, public, read, or write. When a string is changed read or
write, the software used to connect to the BTRM must also use the same strings for
read write access. If you wish to use SNMP alerts the Read and Write strings will need
to be configured to match your network. These settings should only be changed by a
Network Administrator or by someone who understands the proper settings for your
network.
Leaving a field blank will disable it.