TerraWave BTRM-200 - Manual (Page 23)

VENTEV INNOVATIONS BTRM200 Battery Test Remote Monitoring System – User Guide V1.0
23
The following information should be obtained from your Network Administrator to
setup the SMTP server.
7.5.2. Port
Enter the Port number the SMTP server uses, select SSL if it uses Secure Socket
Layer. Normally this port is 25. For secure servers other port numbers are
typically used such as Secure SMTP (SSMTP) - port 465 and Secure IMAP (IMAP4-
SSL) - port 585.
7.5.3. User name and Password
If you are using your dedicated IP provider’s internet service and its email server
you will likely leave these two items blank. If you are on a public network, most
likely you will need to access a secure server using SSL. In this case the user
name and password will likely be required.
7.5.4. Server Address
This is the IP address or IP name of your outgoing email server. For example
Gmail’s server is smtp.gmail.com
7.5.5. Destination Email Address
The BTRM will send the email notifications to this email address.