SATEC ETC2002 - Manual (Page 56)

Appendix Technical Specifications
56 ETC2002 Network Communicator
Appendix Technical Specifications
Environmental Conditions
Operating temperature: -20°C to 60°C (-4°F to 140°F)
Storage temperature: -25°C to 80°C (-13°F to 176°F)
Humidity: 0 to 95% non-condensing
Construction
Dimensions: see Figure 2-1
Weight: 1.23kg (2.7 lb.)
Materials
Enclosure: Aluminum
Terminals: PBT (UL94-V0)
Connectors: plug-in type, Polyamide PA6.6 (UL94-V0)
Packaging case: Carton and Stratocell® (Polyethylene Foam) brackets
Power Supply
120/230 VAC, 50/60 Hz: Rated input: 85-265 VAC
120/220 VDC Option: Rated input 88-290VDC,
Burden: 10W
Isolation: 3200 VRMS
12 VDC Option: Rated input 9.6-19 VDC
24 VDC Option: Rated input 19-37 VDC
48 VDC Option: Rated input 37- 72 VDC
Burden: 10W
Isolation (except 12VDC): 1350 VRMS
Wire size: up to 12 AWG (up to 2.5 mm 2 )
Digital Inputs
Four digital inputs, dry contact sensing
Internal power supply 24 VDC
Wire size: 12 AWG (up to 2.5 mm
2 )
Terminals pitch: 5 mm
Galvanic isolation: 2000V RMS
Communication Ports
COM1 Ethernet Port
Transformer-isolated 10/100BaseT Ethernet port.
Connector type: RJ45 modular.
Supported protocols: Modbus/TCP (port 502), SATEC ASCII/TCP (port
5001), and DNP3/TCP (port 20000).
Number of simultaneous connections: 8.
COM2 Dial-up Modem
Transformer-isolated internal 56K modem
Connector type: RJ11
COM3 Serial EIA RS-232 optically isolated port
Isolation: 2,000 V RMS