Configuring data server – SATEC ETC2002 User Manual
Page 45
Chapter 5 Setting Up the ETC2002
Configuring Data Server
ETC2002 Network Communicator
45
The following table lists available options.
Parameter Options
Default Description
XPW Server IP Address
207.232.60.18 The IP address of the
eXpertPower server
XPW Server Port
0-65535
5001
The TCP service port of the
eXpertPower server
XPW Client Enabled
NO, YES
NO
Enables operations of the
eXpertPower client
Time to Next Session, min 1-99999
The time remaining to the
next connection session
Configuring Data Server
Using HyperTerminal or Telnet
in Chapter 3 for information on Data server operations.
To view or change the Data server settings, type datasrv and press Enter.
>datasrv
You will be prompted for the password. The factory-set password is 0 unless
you have changed it in your ETC2002.
Enter password:*
Data Server Configuration Commands
------------------------------------
h - Display this text
p - Server parameters
s [N] - Set address range *
i [N] - Display address range settings *
q - Quit menu
*(N - address range number)
Data server>