SATEC ETC2002 - Manual (Page 30)

Chapter 4 Connecting to the ETC2002 Using PAS Software
30 ETC2002 Network Communicator
6. In the “Connection” box, select the Dial-up connection you
created for the ETC2002. See Dial-Up Networking for
information on how to create a Dial-up connection in
Windows.
7. Check the AutoDial box, if you wish PAS to automatically
connect to your ETC2002 every time you access it from
PAS; otherwise you must manually dial your connection.
Manually Dialing your Connection
To manually dial your connection:
1. Select your connection name from the Start menu -> Settings ->
Network and Dial-Up Connections.
2. Click Dial.
Setting Up the ETC2002
PAS allows you to prepare setup data for the ETC2002 offline without the
need to have it connected to your PC.
Select the ETC2002 site from the list box on the PAS toolbar, and then select
the desired setup group from the Meter Setup menu. Click on the tab with the
setup you want to create or modify, and then fill in the boxes with the desired
configuration data. Click the “Save as…” button to store your new data to the
site database.
To save your setup to another site database, select it from the file panel, and
then click OK.
To re-use setups from another site, copy them to your present site database.
Click Open, select the desired site database, and then click OK. The opened
setup is copied to your site database.
You can also copy all setups from one site database into another site's
database. Select a device site from the list box on the toolbar from which you
want to reproduce setups, and then select “Copy to...” from the Meter Setup
menu. Select the site database to which to copy setups, and click OK.
Downloading Setup to the ETC2002
You can update each setup in your ETC2002 one at a time or download all
setups together from the site database.
To update a particular setup in your device, check the On-line button on the
PAS toolbar, select a device site from the list box on the toolbar, and then
select the desired setup group from the Meter Setup menu. Click on the tab
of the setup you want to download to the device, and then click Send.
To download all setups to your device at once, check the On-line button on
the PAS toolbar, select the device site from the list box on the toolbar, and
then select Download Setups from the Meter Setup menu.