SATEC ETC2002 - Manual (Page 23)

Chapter 4 Connecting to the ETC2002 Using Telnet
ETC2002 Network Communicator 23
Running the Telnet Client
1. From the Start menu, select Run, type telnet and click OK.
The following text appears in a window:
Microsoft (R) Windows 2000 (TM) Version 5.00 (Build
2195)
Welcome to Microsoft Telnet Client
Telnet Client Build 5.00.99206.1
Escape Character is 'CTRL+]'
Microsoft Telnet>
2. Type
open
followed by the ETC2002 IP address, followed by 5023 as
the ETC2002 port number, for example:
Microsoft Telnet>open 192.168.0.203 5023
Opening a Telnet Session
When a telnet connection is established, the ETC2002 Telnet server prints a
list of the available commands as follows:
ETC Telnet Commands.
--------------------------------------------------------
--
h - Displays this text
ver - About ETC version
password - Password setting
ip - TCP/IP settings
port - TCP service port number
COM[Port] [Baud] [Data] - Serial port settings:
Port = 3/4/5
Baud = 1200/2400/…/57600/115200
Data = 7E/8N/8E