SATEC ETC2002 - Manual (Page 41)

Chapter 5 Setting Up the ETC2002 Configuring Gateway Options
ETC2002 Network Communicator 41
The following table lists available RF modem options.
Label Options Default Description
MAC Net ID 0-255 0 MAC layer network ID
MAC Node ID 0 0 MAC layer node ID
Network Net ID 0-255 0 Network cluster ID
Network Node ID 0 0 Network layer node ID
Node Type RN+, RN-,
RFD
RN+ Node router type
RF Channel 907 MHz,
910 MHz,
912 MHz,
915 MHz,
917 MHz,
920 MHz,
922 MHz 915 MHz RF channel frequency
RF Power 0-255 255 RF send power
Number of Cluster Child
Nodes 0-255 10 Number of the slave nodes on
the RF sub-network
Network Cluster Tree
Depth
0-255 10 Number of levels in the cluster
tree on the RF sub-network
Network Routing
Algorithm AODV,
Cluster Tree,
Hybrid Hybrid Defines the routing algorithm
and the topology of the RF sub-
network
Configuring Gateway Options
Using HyperTerminal or Telnet
To view or change the ETC2002 gateway settings, type mbus and press
Enter. To change a parameter, type your new setting after the prompt and
press Enter. To leave the setting unchanged, just press Enter.
>mbus
ETC MODBUS ID: 99
New:
Start address: 1