Roxul Industrial Insulation Process - Manual (Page 98)

j) AGI
“Arbeitsgemeinshaft Industriebau e.V”. (AGI)
is a German association of manufacturers,
engineering companies and universities. AGI was
founded in 1958 to establish a common platform
to exchange best practices within Industry.
These practices, which are summarized in the
AGI guidelines (so called “Arbeitsblätter”) are
established in cooperation with the German DIN,
VDI and CEN members for insulation. The most
relevant standard for insulation work is shown on
the next page.
More information is available via www.agi-online.de.
Material standards and design guidelines Field of application/scope
AGI Q02: Insulation works on industrial installations
– Terms
The terms used in the AGI Q working documents are defined in this working document.
AGI Q03: Construction of thermal and cold insulation
systems – Insulation works of industrial plants
This working document applies to insulation works performed on industrial installations. The working
document classifies works into thermal insulation works for operating temperatures above the ambient
temperature and cold insulation works for operating temperatures below the ambient temperature.
AGI Q05: Construction of industrial plants – Bases,
design, requirements with regard to the interfaces of
plant components and insulation
This working document has been compiled for planners and designers who have to design the industrial
plants, including the essential thermal or cold insulation. It examines, in particular, the interfaces between
plant construction and insulation.
AGI Q101: Insulation works on power plant components
– Construction
Working document Q 101 applies to insulation works performed on power plant components such as steam
generators and flue gas cleaning systems, pipe systems and steel flues
AGI Q103: Insulation works on industrial plants – Electri-
cal tracing
This working document applies to insulation works performed on industrial plants with electrical tracing.
AGI Q104: Insulation works on industrial plants – Tracing
systems with heat transfer media
This working document applies to insulation works performed on industrial installations, which are heated
and/or cooled by means of heat transfer and/or refrigerant media, for example in tracing pipes or half pipe
sections.
AGI Q132: rock wool as insulation for industrial plants
This working document applies to rock wool insulation, which is used for thermal, cold and acoustic insula-
tion of technical industrial plants and technical building appliances.
AGI Q151: Insulation works – Protecting thermal and
cold insulation systems on industrial plants against
corrosion
This working document applies to corrosion protection coating systems for the surfaces of industrial plants,
such as appliances, columns and pipes, which are insulated against heat and cold loss. Since the DIN EN
ISO 12944 standard provides no explanations with regard to protecting insulation systems against corrosion,
this working document should be considered as a supplement to standard DIN EN ISO 12944. This working
document does not apply in respect of adhesive primers.
AGI Q152: Insulation works on industrial plants – Protec-
tion against moisture penetration
This AGI working document applies to objects where the insulation must be protected against moisture and,
above all, against the ingress of liquids, (e.g. water, heat transfer oil).
AGI Q153: Insulation works on industrial plants – Mount-
ing supports for support constructions
AGI working document Q 153 applies to the design and construction of mounting supports. They transfer the
loads of the insulation onto the support constructions on the object.
AGI Q154: Insulation works on industrial plants – sup-
port constructions
AGI working document Q 154 applies to the construction of support constructions.
95