Robustel M1000 User Guide - Manual (Page 9)

Robustel GoRugged M1000 User Guide
RT_UG_M1000 _v.2.0.0
20.12.2013 8 / 83
Confidential
Chapter 1. Product Concept
1.1 Overview
Robustel GoRugged M1000 is a rugged smart cellular modem offering state-of-the-art GSM/GPRS/EDGE connectivity
for machine to machine (M2M) applications.

Control via AT commands (Hayes 3GPP TS 27.007 and 27.005).

GPRS, TCP/IP, SMS, CSD access via AT commands.

Featured SMS Direct mode which can transparently convert serial data to SMS or vice versa without using AT
Commands. Verification of incoming Caller ID is implemented to block un-authorized users.

Supports Modbus RTU slave protocol, converts alarm to SMS without using AT commands.

Auto reboot via SMS/Caller ID/Timing.

Remote configuration via SMS.
 RS232/RS485 selectable by software, 1DI/1DO.

Six LED indicators provide signal strength (RSSI) and status.
 Wide range input voltages from 9 to 36 VDC and extreme operating temperature.

The metal enclosure can be mounted on a DIN-rail or on the wall, also with extra ground screw.

Firmware upgrade via serial interface.
1.2 Packing List
Check your package to make certain it contains the following items:
 Robustel GoRugged M1000 modem x1