18 debug (only available under “normal mode”), Debug (only available under “normal mode”) – Robustel M1000 User Guide User Manual

Page 46

Text mode
Original mode

Robustel GoRugged M1000 User Guide

RT_UG_M1000 _v.2.0.0

20.12.2013

45 / 83

Confidential

3.2.18 Debug (Only Available under “Normal Mode”)

In this tab, user could change serial port baud rate in Normal Mode. Please operate according to follow steps to
change baud rage (default baud rate is 115200 bps, in this case we want to change baud rate to 19200 bps):