Robustel M1000 User Guide - Manual (Page 23)

Robustel GoRugged M1000 User Guide
RT_UG_M1000 _v.2.0.0
20.12.2013 22 / 83
Confidential
Settings->Export
Export the Modem’s current configuration file to your local
PC.
Settings->Import
Import the Modem’s configuration file from local PC to the
Modem.
Help->Help Show some notices about this configurator.
Help->About
Manufacturer’s information and Modem Configuratior
version.
Port No.
Select the local RS-232 port to communicate with the
Modem.
Connect Connect the Modem Configurator to the Modem.
Disconnect
Disconnect the Modem Configurator to the Modem, and
release the PC’s RS-232 port.
Read Read Modem’s current settings.
Write
Save changes into Modem.
Note: Reboot for changes to take effect.
Default Set Modem to default factory settings.
Reboot Reboot the Modem.
Exit Exit the Modem Configurator.
Disconnecting Modem is not communicating with Modem Configurator.
Connecting Modem is communicating with Modem Configurator.
Serial Management Settings
Show current RS232 communication parameter.
Version Show current software and hardware version of Modem.