RKI Instruments Gas Tracer 10,000 ppm - Manual (Page 36)

29 • Leak Testing 10,000 ppm Gas Tracer Operator’s Manual
on page 16. Select the desired display range. In the example below,
1000 ppm has been selected. Press and hold the (SHIFT)T button,
then press and hold the AIRS button and hold both until you hear
a beep. The Station ID Select Screen will display and the current
station ID will be flashing.
2. Use the (SHIFT)T and AIRS buttons to scroll to the desired station
ID, then press and release the POWER ENTER button to continue
to the Base Reading Screen. To return to the Station ID Select Screen
without taking a base reading, press and release the RESET
SILENCE button.
3. In order to get a base, or background, reading, take the instrument
a few feet away from where you intend to test. To save the base
reading, press and release the POWER ENTER button.
S Id
001
SEL
0
1000
ppm
ppm
LEAK CK MODE
CH
4
BASE