MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers - Manual (Page 66)

OPERATION
6. Raise and unlock lever (A) and undo cinch straps (B).
7. Move hose bundle to store on header.
Figure 5.60
8. At the header, disconnect electrical connector (D) by
turning collar counterclockwise and pull connector
to disengage.
9. Disconnect the pressure (A), return (B), and case
drain (C) hoses.
Figure 5.61
10. Move hose bundle from header and locate on
windrower left side (cab forward) with hoses in
support (B).
11. Rotate lever (A) clockwise and push to engage bracket.
12. Locate electrical harness through support (B) and
attach cap to electrical connector (C).
Figure 5.62
169457
58
Rev. F