MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers - Manual (Page 146)

MAINTENANCE AND SERVICING
4. Remove four bolts (A).
5. Remove cover (B) and deflector (C).
Figure 7.38
Installing the Driven Deflector
Follow these steps to replace the driven rotary deflector:
1. Position new deflector (C) on spindle so that it clears
accelerators (D).
2. Install cover (B) and secure with four bolts (A).
3. Tighten bolts.
4. Remove block of wood (if used).
Figure 7.39
Removing the Driveline Deflector
Follow these steps to replace the driveline deflector:
1. Lower header to ground.
2. Shut off the engine and remove the key.
3. Open cutterbar doors. See Section 5.5 Cutterbar
Doors, page 31 .
169457
138
Rev. F