MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers - Manual (Page 65)

OPERATION
5.8.2 Detaching the Header (M200 Windrowers)
DANGER
Stop engine and remove key from ignition before leaving operator’s seat for any reason. A child or even
a pet could engage an idling machine.
To detach a header from an M200 windrower, follow
these steps:
1. Lower header to ground. If ground is soft, place blocks
under header.
2. Stop engine and remove key.
3. Move left side (cab-forward) platform (A) to
open position.
Figure 5.58
4. Disconnect pressure (B) and return (C) hoses from
fittings on valve block (A).
5. Install plugs and caps on open windrower lines and
header hoses.
Figure 5.59
169457
57
Rev. F