MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers - Manual (Page 148)

MAINTENANCE AND SERVICING
3. Insert driveline (B) into deflector (C) and install onto
shaft. Ensure that driveline (B) grease zerks will be
accessible through large opening in deflector.
4. Align mounting holes in deflector (C), spindle, and
driveline (B) and reinstall four bolts (A). Tighten bolts.
5. Adjust the upper driveline shield to achieve consistent
gap around deflector shield (C).
Figure 7.43
6. Tighten bolts (A) on shield plates (B).
7. Remove block of wood (if used).
8. Manually rotate discs to check for interference of
adjacent parts.
9. Close cutterbar doors. See Section 5.5 Cutterbar
Doors, page 31 .
WARNING
Ensure cutterbar is completely clear of foreign
objects.
These objects can be ejected with
considerable force when the machine is
started and may result in serious injury or
machine damage.
Figure 7.44
169457
140
Rev. F