MacDon 9250 SP - Manual (Page 46)

Form # 46584 Issue 11/06 Web Rev_01 44
OPERATION
Adding Rear Weight (continued)
To install weight bundle B2266 in rear tractor
frame:
1. Install bolt (A) through welded nut in existing
tractor weight (B) and start jam nut on bolt (A).
2. Insert weights (C) forward of welded pin (D) as
shown, then move weight back towards rear of
tractor.
3. After weights are in position, tighten bolt (A)
against the new weight (C), then tighten jam nut
against weight (B).
NOTE: Install complete weight pack on same side
of pin (D). Total weight per pack is 187 lbs. (85
kg).
NOTE: Installation instructions for behind the
frame weight packages B2980 and B2981 are
included with the kits.
direction of travel
OPTIONAL REAR WEIGHT PACK
(SIDE VIEW)
INSTALLATION OF WEIGHTS (REAR VIEW)