MacDon 9250 SP - Manual (Page 134)

Form # 46584 Issue 11/06 Web Rev_01 132
OPTIONS AND ATTACHMENTS
Consult your Windrower dealer for details on the
following Options & Attachments.
NOTE: If not factory ordered, installation of these kits
is to be done by Windrower dealer.
Air Intake Screen Cleaner
WholeGoods order number: B2972
This automatic screen cleaning device "vacuums" the
screen by means of two rotors.
In-Frame Rear Weight Package
WholeGoods order number: B2266
For heavier headers (3000 lbs. plus, including reel) in
hilly conditions, weight may be added to rear of
tractor frame. One or two weight packs may be
installed, as described on page 44. NOTE: For high
clearance tractors (9352/4952/2952/8152) two of
these weight packs are factory installed.
If additional weight is required after installation of two
in-frame weight packs, behind-frame packages are
available as below:
Behind-Frame Weight Packages
400 lb. (181 kg) Package: WholeGoods order
number: B2980
Additional 300 lb. (136 kg) Package: WholeGoods
order number: B2981 (requires 400 lb. package be
installed)
Header “Express-Down” Module
WholeGoods order number: B2964
Allows the header lift cylinders to completely retract
and lower the header with only momentary activation
of the header height control switch. Also includes
feature by-pass switch. Installation instructions are
included with the kit.
Formed Tail-Wheel Casters
Tractor Models 9250/9350, 4940/4950,
2940/2950, 8140/8150:
WholeGoods order number: B1853 – 9.5L-14 tires
Tractor Models 9352, 4952, 2952, 8152:
WholeGoods order number: B2998 – 7.5-16 tires
Auxiliary Float Spring Kit
WholeGoods order number: B2773
Required to provide adequate float for heavier
headers in windrowing applications.
NOTE: 36’ Double Sickle headers require four
auxiliary float spring kits. See the Windrower Tractor
Parts Catalog for service components of kit.
Forked Tail-Wheel Casters
Tractor Models 9250/9350, 4940/4950,
2940/2950, 8140/8150:
WholeGoods order number: B1854 – 9.5L-14 tires
B2997 – 16.5L-16.1 tires
Tractor Models 9352, 4952, 2952, 8152:
WholeGoods order number: B2995 – 11-16 tires
B2996 – 16.5L-16.1 tires
Hydraulic Reel Fore-Aft Module
WholeGoods order numbers: B2960 – Base Kit*
B2961 – Fore-Aft
Provides hydraulic components and controls required
to accept headers with reel fore-aft option, which
allows in-cab adjustment of reel fore-aft position.
Installation instructions are provided with the kit.
* - One Base Kit B2960 is required for either, or both
the Hydraulic Reel Fore-Aft Module and the
Hydraulic Header Tilt Module. (If both options are
installed, only one base kit is required.)
Hydraulic Header Tilt Module
WholeGoods order numbers: B2960 – Base Kit*
B2962 – Header Tilt
The mechanical center link to the header is replaced
with a hydraulic cylinder to allow in-cab adjustment of
header tilt (angle) by means of a switch on the
ground speed control handle.
Shallow Angle Kit
WholeGoods order numbers: B4482
Modifies tractor lift linkage to permit shallower header
angle for rocky field conditions to prevent cutterbar
damage.
AIR INTAKE SCREEN CLEANER
FORKED CASTER OPTION
Approved Radio Source:
REI (Radio Engineering Industries, Inc.)
Omaha, Nebraska
Ph. 1-800-228-9275