Orbit Baby Infant Car Seat and generation-one Base User Manual
Page 6
10
10
Befor
e Y
ou Begin
11
Befor
e Y
ou Begin
11
CLICK AND CHECK
When using the Orbit Infant System, always pay attention
to the
CLICK (through sound and feel) that says
you’ve successfully completed a step. Then,
always immediately follow up with a
CHECK
by tugging or pulling what you just clicked into place.
Your Child’s Safety Depends On You
cont’d
3. Properly dock the Infant Car Seat into the Base.
The sections in
“Use the Infant Car Seat with the Base” provide you with detailed
instructions for this step.
4. Set the shoulder straps of the Restraint Harness at the proper
height for your child.
The sections in “Secure Your Child” provide
you with instructions for this step.
5. Properly secure your child in the Infant Car Seat.
The sections in
“Secure Your Child” also provide you with instructions for this step.
6. Ensure that both the Base and Infant Car Seat are level once
installed
. The Infant Car Seat must be properly leveled. Too reclined
can result in injury or ejections. Too upright can result in breathing
diffi culties.
7. Check the security of the Infant Car Seat by pulling upwards in
several different directions after docking it into the Base.
The
Base should not move more than 1” in any direction once installed,
and the Infant Car Seat must be locked in the rearward facing
position.
Your Child’s Safety Depends On You
cont’d