Orbit Baby Infant Car Seat and generation-one Base - Manual (Page 14)

Installing the Base
26
26
Install the Base
27
27
At the safest seating location,
follow the appropriate
instructions for installing the
Base according to what vehicle
restraint method is available. If
the LATCH Belt or vehicle seat
belt does not stay tightly adjusted
around the Base at all times, refer
to your vehicle owner’s manual.
Choosing Where to Install the Base
cont’d
Some vehicles do not have any seating locations where a child
restraint system can be installed safely. If you are unsure where
to place the Base, refer to your vehicle owner’s manual for specifi c
instructions about seating locations that are safe for child restraints.
NEVER secure the Base in a seating location with a front
airbag. Check your vehicle owner’s manual regarding side air bag
compatibility with child restraint systems (Figure A).
NEVER secure the Base in a front seating location unless
recommended by the vehicle owner’s manual.
The Base must be installed in forward facing vehicle seats.
Side facing or rear facing vehicle seats CANNOT be used (Figure B
& C).
Do not secure the Base and Infant Car Seat in seating
locations where the seat back does not lock in an upright
position.
!
WARNING
!
Improper placement of Base and Infant Car Seat
increases the risk of serious injury and death
Choosing Where to Install the Base
A
B
C