Orbit Baby Infant Car Seat and generation-one Base - Manual (Page 33)

64
64
Install the Base
Carrying and Using the Infant Car Seat
64
64
10
Install the Base
65
65
Carrying and Using the Infant Car Seat
65
65
To carry the Infant Car Seat:
1. Raise the Soft Carrier Handle
(Photo
A).
2. Insert the hook and loop fastener
through the D-ring on the Soft
Carrier Handle Grip. Secure in
place (Photo B).
3. Lift the Infant Car Seat with a fi rm
grasp on the Soft Carrier Handle.
Undo the hook and loop fasteners and
lower the Soft Carrier Handle when not
in use. Keep the Soft Carrier Handle
lowered fl ush with the Upholstery when
using the Infant Car Seat in your vehicle
(Photo C).
Using the Soft Carrier Handle cont’d
Always secure the Soft Carrier Handle
Grip in place before carrying the Infant
Car Seat
Using the Soft Carrier Handle
!
WARNING
!
FALL HAZARD: ALWAYS secure
your infant with the Restraint
Harness straps.
PINCH HAZARD: Ensure that your
child’s fi ngers and appendages are
clear of moving parts.
The Infant Car Seat can tip when
carried by the Soft Carrier Handle
- ALWAYS secure the Soft Carrier
Handle Grip to the Soft Carrier
Handle before lifting to prevent
tipping.
-ALWAYS lift the Infant Car Seat by
the Soft Carrier Handle Grip.
Death or Serious Injury
can occur
A
B
C