Orbit Baby Infant Car Seat and generation-one Base - Manual (Page 27)

52
52
Install the Base
Securing Y
our Child
52
52
Install the Base
53
53
Securing Y
our Child
53
53
It is important to check the fi t of the
Restraint Harness periodically. The
straps must be properly positioned on
your child’s shoulders and thighs
(Photo A).
To adjust the fi t of the Restraint
Harness:
1. Place your child in the Infant Car
Seat and determine which pair of
shoulder strap slots are even with
or just below the child’s shoulders
(Photo B).
DO NOT use shoulder strap slots
that are above your child’s shoulders
(Illustration C). With the rear-facing
Infant Car Seat, shoulder straps
positioned in slots above the
shoulders will not hold your child
securely in a sudden stop or crash.
Sizing the Restraint Harness to Your
Child cont’d
!
WARNING
!
Death or Serious Injury
can occur
Failure to properly fi t the
Restraint Harness for your child’s
size increases the risk of serious
injury or death in the event of
a sharp turn, sudden stop or
crash. The Restraint Harness must
be properly adjusted to fi t your
child according to the following
instructions.
Sizing the Restraint
Harness to Your Child
A
B
C