Orbit Baby Toddler Car Seat G2 - Manual (Page 52)

102
102
Securing Y
our Child
Securing Y
our Child
103
103
6. CHECK that there are no twists in the
restraint harness straps (Photo C).
7. Insert both buckle tongues into the
crotch buckle (Photo D). You should
hear and feel a
CLICK as each buckle
tongue is inserted into the buckle.
8. Pull up on the buckle tongues to
CHECK that they are locked. DO NOT
use the car seat if the restraint harness
does not lock in place, and contact
Orbit Baby.
9. Gently pull up on the shoulder straps to
tighten the lap section of the restraint
harness (Photo E).
10. CLICK the chest clip pieces together
and position the chest clip at armpit
level, as shown (Photo F).
11. Slowly pull the adjuster strap to snugly
adjust the restraint harness onto the
child (Photo G).
12. CHECK again that the restraint harness
is not twisted (Photo C).
13. CHECK that the restraint harness
is snug on shoulder and thighs. At
your child’s shoulder, try to pinch the
webbing up and down; your fingers
should slide off. (Photo H). A snug
strap should not allow any slack. It
lies in a relatively straight line without
sagging. It does not press on the
child’s flesh or push the child’s body
into an unnatural position.
C
D
E
F
G
H
Securing Your Child with the Restraint
Harness
cont’d