Opticon OPR 3301 User Manual - Manual (Page 5)

5
When your OPR3301 has been discovered you can try to let your remote device
connect with your OPR3301.
Print screen of an OPR3301 that has been discovered on a PC.
Depending on your Operating system and Bluetooth stack you will either be asked to
enter any PIN code on your remote device or you will be shown a random PIN code.
Either way you will be requested to enter that same PIN code on your OPR3301.
If you are requested to enter any PIN code, then it is easiest to choose the last 4 digits
of the Bluetooth address of your OPR3301 as PIN code, since that is the default PIN
code of your OPR3301. To skip having to enter a PIN code on your OPR3301, read the
'Fixed PIN code' label below to configure this. To change this configuration back to
default again (= entering the PIN code manually) you can read the other label.
Use a fixed PIN code
Enter PIN code manually
(using numeric direct input labels)