Opticon OPR 3301 User Manual - Manual (Page 20)

20
7 OPN2002 compatibility
This application for the OPR3301 is also compatible with the OPN2002. This
compatibility makes it possible to use the unique features of the OPR3301 that aren't
available in the Bluetooth demo application software of the OPN2002.
This includes the following features:

Memorizing (automatic, manual and batch mode)

Support of buzzer, LED and trigger control using serial commands

CRD3301 support (disabled by default; use 'Connect to cradle' to enable)

Bluetooth options:

Auto disconnect time

Disable auto connect (on reading a Bluetooth address label)
7.1 2-Button interface of the OPN2002
The OPN2002 has the advantage over the OPR3301 of having 2 keys instead of just 1.
This makes the user interface of the OPN2002 a little more user friendly.
For this reason the OPR3301 application will behave slightly different on the OPN2002
in the following situations:

To manually disconnect using the Trigger-to-disconnect functionality, the small key
should be pressed instead of the trigger key. This avoids accidentally
disconnecting while reading barcodes.

On the OPN2002 the Trigger-to-disconnect functionality is enabled by default. The
default time is 5 seconds.

The small key of the OPN2002 can be used to make the OPN2002 discoverable
and connectable (as slave) for 2 minutes.
7.2 Minimal required OS version
To be able to use all functionality of this application on the OPN2002, the minimal
required OS software for the OPN2002 is RBGV0212 (recommended version for
memorizing: RBGV0220). This software can be found on our web site and can be
loading on the OPN2002 using the mini-USB cable or the CRD2000 cradle.
7.3 Loading software on the OPN2002
Both OS and application files for the OPN2002 can be loaded by using a small PC
application called Appload, which can be download from our web site.
The OPN2002 uses a different Operating System version than the OPR3301. Before
trying to load new software on the OPN2002, make sure the file contains the following
3-
letter code indicating it’s an OPN2002 file.
Terminal
OS Application
OPN2002 RBG RFG*