NTi Audio Digilyzer DL1 - Manual (Page 64)

64
Technical Specification
9. TeCHNICAL speCIFICATIoN
Frame Consumer / Professional, up to 24 bit,
Sampling frequency f
s
= 32 – 96 kHz,
Also supports: Interleaved 96 kHz mode
on all inputs (single channel double
sampling frequency modes)
Measurements
Signal
Level-FS, level-RMS, signal frequency,
THD+N, event logger, frequency sweep,
PPM, scope, overload detection,
Full-Scale detection
Carrier Sampling frequency (accuracy ±2.5 ppm),
carrier level
Frame Channel status according to AES 3
(ed. 2003) and IEC 60958-3 (ed. 2003),
bit statistics
Event logger
Recording resolution selectable 1”, 10”, 1’, 10’, 1h
Recording duration selectable 8’, 83’, 8h, 83h, 20days
Display Δt 1”, 10”, 1’, 10’, 1h, 10h, 24h, all
Recording intervals max. 500
Single errors in one
recording interval 10 - 36 000
I nput connectors AES 3 (110 Ohm) XLR, S/PDIF (RCA),
TOS-Link, ADAT,
AES 3id (75 Ohm) using Chinch-BNC
adapter, phantom power resistant
Monitor Built-in speaker, headphone connector
Display Backlit graphic LCD
Power supply - 3x AA size dry batteries (alkaline),
typical lifetime 8 hours
- External DC power, 7.5 VDC, 500 mA,
stabilized, use NTi Audio recommended
parts only