NTi Audio Digilyzer DL1 - Manual (Page 38)

38
Measurement Functions
Masking events
For a better overview some events can be hidden from the logging
display (e.g. the audio signal clips very often or the channel status
changes permanently because of time code). Therefore, the Digilyzer
offers you the possibility to select which events you want to see or
hide. Select the field MASK to enter to the LOGGER DISPLAY MASK
screen.
The first column displays all event categories. The complete event
category or single events of each category can be masked. The filled
square indicates that the event is displayed at the event list.
NOTE Masking does not effect the recording.
All events are logged at anytime.
Overview of used event coding
See Appendix.
Fig 5-23, Logger display mask
Event
categories
Event visible at
event list
Event masked
(not visible at
event list)
All masking
on/off
Application hint:
To read out one specific event only
- select in the LOGGER DISPLAY MASK the ALL ON/OFF field
and press enter -> all squares will be empty
- select the specific event you are looking for, press enter and the
specific square is filled up