NTi Audio Digilyzer DL1 - Manual (Page 35)

35
Logger
The event logger records any irregularity of the digital signals. Besides
the common expectations events such as change of sampling
frequency, word length, consistency check results and many more
are covered.
What is an event?
Events are changes or irregularities of the input signal. They are
acquired for the two channels separately (wherever reasonable) and
are split into the following categories:
• Carrier based events
• Frame based events
• Audio signal based events
• Channel status based events
• Consistency check based events
Basics of logging
Whilst a log is running, the Digilyzer acquires all events (details are
listed in the Appendix). The Digilyzer bundles all events which are
occurred within the recording interval. It generates a new “record”
when a recording interval has finished. The recording interval can be
adjusted at the start of a new log.
Basic setting of logger data
Measurement Functions
Fig 5-20, Recording setup window
Record
field
Recording
interval
Calculated
maximum
recording
length