NTi Audio Digilyzer DL1 User Manual
Page 17
17
8. Change auto power off time
- Move the cursor to SET on the
menu line and press the enter
key.
- Select AUTO POWER OFF
with the cursor keys and press
the enter key.
- Set the time to 60 MIN with the
cursor keys.
- Confirm the setting with the
enter key.
- Press ESC to leave the
SETUP screen.
9. Backlight / power off
- Press the On/Off key shortly
to energize the backlight.
- The backlight remains active
according to the setting in the
SETUP menu.
- Press the On/Off key for
two seconds to switch the
instrument off.
8
Congratulations, the first steps have been done with the Digilyzer to
support the basic knowledge of the menu and device handling.
NOTE
• Pressing the enter key changes a value directly or
enters the selection mode (blinking cursor). The
available settings may be selected with the cursor
keys.
• In the selection mode you may press
- ENTER to confirm the setting
- ESC key to undo the setting.
Fig 3-06, Auto power off setting
First Steps