NTi Audio Digilyzer DL1 - Manual (Page 14)

14
Battery replacement
Insert three pieces of 1.5 V alkaline batteries, type AA, LR6, AM3 into
the Digilyzer battery compartment, as shown below.
NOTE • The use of rechargeable NiCd- or NiMH-batteries
causes shorter battery lifetime than specified.
• Do not insert batteries of different types.
• Note the correct polarities of the inserted batteries.
• Remove the batteries as soon as they are flat.
Fig 2-10, Open battery compartment Fig 2-11, Inserted batteries
1. Press 1. Press
2. Pull
Overview
Speaker
Rubber
cushion