NTi Audio Digilyzer DL1 - Manual (Page 11)

11
• Some functions, e.g. SCOPE, are one channel functions only. You
only hear the channel which is displayed on the screen.
Digital versus analog
Installations with digital and analog audio lines often cause headache
and struggles. In reality some analog line maybe connected and the
Digilyzer can not lock to the (non digital) signal. Therefore, the Digilyzer
has the ability of analog monitoring. The Digilyzer may not lock to the
input signal digitally, but it routes the signal directly to the speaker
and headphone output, so you may hear the analog input signal
acoustically. For visual clarification ANALOG MONITORING ON is
flashing on the display.
Channel B selected
Fig 2-06, Channel B selected
Fig 2-07, Analog monitoring
Flashing
Overview