Multiquip RX 1510-C/-I/-CI - Manual (Page 90)

RX 1510-C/-I/-CI
– 90 –
S
HD
8.8 Checking hydraulic oil level
The sight glass for the examination of the hydraulic oil level is located under the
operating panel. The fill level should be within the sight glass.
NOTE
If it is determined during the daily oil level check that hydraulic oil is missing,
immediately examine all aggregates, lines, and hoses for leaktightness and fill up
missing hydraulic oil before beginning work.
Refilling hydraulic oil:
1) Open HD cap.
2) Fill hydraulic oil to the fill level approximately in the centre of the sight glass.
3) Close
HD cap.
Leaking fuel pollutes the soil!
► Collect any leaking fuel and dispose of in an environmentally responsible
manner together with the fuel filter!
► Do not spill fuel.
► Collect leaking fuel, do not let it seep into the ground.
ENVIRONMENT
Maintaining the machine