Multiquip RX 1510-C/-I/-CI - Manual (Page 69)

RX 1510-C/-I/-CI
– 69 –
F I 4020
F I 40 I0
NOTE
The ignition start switch has a starter anti-repeat function. The starter is not
activated anymore, if the engine is running.
► At the most 15 seconds continuous starting and in between breaks of approx.
1 minute.
► Identify and repair cause of malfunction (malfunction table), if the engine
should not start.
The following code is displayed after starting: „F I-00”. The machine waits for
infrared control commands and is ready for use.
Start-up