Multiquip RX 1510-C/-I/-CI - Manual (Page 12)

RX 1510-C/-I/-CI
– 12 –
5. Start-up 59
5.1 Safety instructions 59
5.2 Examination before start-up 59
5.2.1 Checking hydraulic oil level 59
5.2.2 Checking engine oil level 60
5.2.3 Checking cooling water level 61
5.2.4 Checking the contamination degree of the air filter 62
5.2.5 Checking fuel level / Tanking fuel 63
5.2.6 Adjusting address to transmit transmitter signals 63
5.3 Starting the machine 65
5.3.1 Switching ignition on 65
5.3.2 Stand-by mode 66
5.3.3 Starting the machine at the ignition lock 66
5.3.4 Starting the machine with the manual control device 67
5.3.5 Starting the machine with the infrared control. 68
5.4 Switching machine off 70
5.4.1 Switching the machine off at the ignition lock 70
5.4.2 Switching the machine off with the manual control device 71
5.4.3 Switching the machine off with the infrared control device 72
6. Using the machine 73
6.1 Safety instructions 73
6.1.1 General 73
6.1.2 Before operating the machine 74
6.1.3 Using the vibration function 74
6.2 Parking the machine 76
7. Loading and transporting the machine 77
7.1 Safety instructions 77
7.1.1 General 77
7.1.2 Loading the machine with a loading ramp 77
7.1.3 Loading the machine with hoisting gear 77
7.2 Using the transport protection 78
7.3. Loading the machine with ramps 79
7.4 Loading the machine with hoisting gear 79
7.5 Securing the machine for transport 80
Table of Contents: