Fh i i00 – Multiquip RX 1510-C/-I/-CI User Manual
Page 53
RX 1510-C/-I/-CI
– 53 –
Start
Stop
FH I I00
100
1000
Example display function:
• F H 1100
Driving left forward with vibration forward
4.4.3
Cockpit display with cable control
Start / Stop function
Control mode
Code
number:
Meaning:
F
H
4010
"Start" key is activated. ► Starting procedure is initiated.
F
H
4020
The motor has started. ► Release „Start” key.
F
-
4050
This error message appears, if the "Start" key is released during
the starting procedure, the engine has not yet started and it is
set to start again immediately after releasing the "Start" key. This
function prevents the starter engaging, while the engine is still in
motion.
F
H
4100
"Stop" key is activated. ► Stop procedure is initiated. ► The
machine controller waits, until the generator signal, the speed
signal and the oil pressure signal are not sent anymore.
F
H
4200
Stop sequence is continued.
F
H
4300
The operating hour meter is secured. K15 is then switched off.
F
H
4400
The operating hour meter is saved.
Display and operating elements: