Multiquip RX 1510-C/-I/-CI - Manual (Page 37)

RX 1510-C/-I/-CI
– 37 –
2.4 Organisational, personal matters
• Machine operation is only admissible after proper instruction and in observance
of this manual.
• The safety regulations described in these safety regulations must be observed,
likewise the guidelines of the Civil Engineering Professional Association "Safety
regulations for the operation of road rollers and soil compactors" as well as the
relevant accident protection regulations, the recognised safety-related regulations
and country-specific regulations.
• Only qualified and appropriately trained specialised personnel, with a minimum
age of 18 years, may operate or maintenance the machine. Only trained specialists
may carry out maintenance and repair work, which exceeds the scope of these
instructions.
• The operating instructions must have been read and understood before carrying
out any activity on or with the machine.
• Each person, who is assigned with operation, maintenance, or repair of the
machine, must have read and follow the safety regulations. If necessary this must
be verified by the applying enterprise by signature of the assigned person of the
person.
• Persons acting under the influence of drugs, medicines or alcohol may not
operate, maintain or repair the machine.
• Only appropriately trained specialists may carry out work on the electrical system
of the machine.
• Malfunctions or damage to the machine must be reported immediately to the
person responsible on the building site.
• For reasons of safety, users are prohibited from making their own modifications
or conversions to the machine. This machine may only be equipped with original
spare parts, which have been constructed for this machine and correspond to the
requirements of the manufacturer. The installation or use of special `equipment
or special parts can impair driving safety.
2.5 Product-specific dangers
2.5.1 During operation
• There is a permanent risk of crushing during operation in the area of the articulated
joint. Staying in this area during application is therefore not permitted. Generally,
a safety distance of at least 2 meters to the machine must be observed during
operation.
Safety instructions