MTS Landmark System - Manual (Page 76)

a) Now that your hands are no longer required to be near the specimen, increase the force lower limit
to a value that will allow clamping of the specimen in the upper grip.
b) Select Station Manager > Display > Station Setup > Channels > Ch1 (or other depending on
your configuration) > Force, click the Channel Input Signals button, and then select the Limits
tab.
c) Enter -1 kN in the Lower Limit text box and ensure that Interlock is selected for the Action.
Position the Crosshead
Adjust the position of the crosshead using the hydraulic controls.
Description Item
Crosshead Lock 1
Crosshead Lift 2
76 | MTS Landmark Test System Operation
Running the Example HCF Test