MTS Landmark System - Manual (Page 106)

2. Set Manual Command to Displacement.
a) In the Station Manager application main window, click the Manual Control button.
b) Ensure that Exclusive Control is checked.
c) In the Manual Controls window, select a Control Mode of Displacement.
d) Ensure that Enable Manual Command is checked.
3. Reset/Override the Interlock.
In the Station Manager application main window, click the Reset/Override button three times to override
the Interlock for 21 seconds, and then power up the HPU and HSM.
4. Move the actuator to within acceptable displacement limits.
106 | MTS Landmark Test System Operation
Running the Example HCF Test