MTS Series 505 SilentFlo Hydraulic Power Unit Model 505-180 - Manual (Page 57)

Testing Model 505.60 HPU Operation
Model 505.60 - 505.180 SilentFlo™ HPU Installation 57
2. Verify that the platform displayed corresponds with the HPU model you are
installing.
• 505.60/.90 Selected—for a Model 505.60 or 505.90 HPU.
• 505.120/.150/.180 Selected—for a Model 505.120 or 505.150 or
505.180 HPU.
If the displayed platform is not correct, press and hold the platform selection
button until the selection changes (5 seconds).
Note This selection can also be made from the HPU Setup panel.
Startup Screen (505.120/150/180 Platform selection shown)
3. Press the Main Display button to go to the Main Display panel.
Platform Selection
Button
Main Display
Selection Button
Hydraulic Fluid
Pressure Display
Enable/Disable Pumps Buttons
(the number of buttons displayed is determined
by the HPU Model)