MTS Series 505 SilentFlo Hydraulic Power Unit Model 505-180 User Manual
MTS Hardware
This manual is related to the following products:
Table of contents
Document Outline
- Technical Support
- Preface
- Introduction
- EU Declarations
- Model 505.60 HPU Component Identification
- HPU Functional Description
- Options Available for the HPU
- Model 505.60/.90 HPU Hydraulic Schematic
- Model 505.120/.150/.180 HPU Hydraulic Schematic
- Model 505.60 HPU Electrical Control
- Model 505.60/.90 Electrical Schematic
- Model 505.120/.150/.180 Electrical Schematic
- Specifications
- Safety
- Installation
- Operation
- Model 505.60 HPU Startup Panel
- Model 505.60 HPU Main Display
- Model 505.60 HPU Data
- Model 505.60 HPU Status
- Model 505.60 HPU Setup
- ROD Setup
- Operating the Model 505.60 HPU Locally or Remotely
- Recovering From an Interlock
- Changing the Water Flow
- Resetting the Thermal Overloads
- Adjusting the Model 505.60 Hydraulic Pressure
- Low/High Pressure Functionality
- Setting Up Run-On-Demand
- Maintenance
- Routine Maintenance Overview Checklist
- Models 505.60/.90/.120/.150/.180 HPU Maintenance Schedule
- Checking the Hydraulic Fluid
- Checking the Low Level/Temperature Detector
- Replacing the Return-line Filter
- Clamp-Style Housing Filter Replacement
- Capscrew-Style Housing Filter Replacement
- Replacing the Optional High-Pressure Filter
- Sampling the Hydraulic Fluid
- Replacing the Hydraulic Fluid
- Inspecting the Heat Exchanger
- Routine Maintenance Overview Checklist
- Hydraulic Power Unit Maintenance and Service Logs