MK Diamond MK-2000 Pro - Manual (Page 9)

MK-2000 Pro Revision 01/02, Effective Date January 10, 2002 Page 9
SAFETY
SAFETY LABEL LOCATIONS:
Safety labels are located according to Figures 1 through 5 below. The labels contain important safety
information. Please read the information contained on each safety label. These labels are considered a
permanent part of your saw. If a label comes off or becomes hard to read, contact MK Diamond or your
dealer for a replacement
Item Location Description Part No.
1A. Motor Rear Warning – Extension Cord Information 155672
1B. Motor Rear Service or Warranty Information 155038
2A. Motor Top Thermal Protection Information N/A
2B. Motor Top Motor Grounding Information N/A
3. Motor, Right Side Motor Electrical Information N/A
4A. Blade Guard, Left Side Caution – General Safety Information 155040
4B. Blade Guard, Left Side Saw Serial Number 157007
5A. Pump, Left Side Warning Connect to Grounded Receptacle N/A
5B. Pump, Right Side Pump Specifications N/A
BRICK SAW SPECIFIC WARNINGS:
Wear eye protection.
Use splash hood for every operation for which it can be used.
Disconnect saw before servicing, when changing cutting blades, and cleaning.
Use tool only with smooth edge cutting blades free of openings and grooves.
Replace damaged cutting blade before operating.
1
A B
2
A B
3
5
A B
4
A B