Brother NC9100H User Manual
Page 76
PRINTING FROM A MACINTOSH
®
7 - 6
2
At this point we must select the correct PPD file for the
machine and also configure the correct LPR information.
Click the Change button in the PostScript Printer
Description (PPD) File section and select the appropriate
PPD file for your model.
3
Now select the Change button below the LPR Printer
Selection text.
4
You must then enter the IP address and service name details
of the machine. When specifying the Queue, use the value
brn_xxxxxx_p1_at
where xxxxxx are the last 6 digits of
the Ethernet address.
Figure 5 Entering the IP address and Queue
5
Click OK to go back to the previous screen.
If you do not specify the correct value the machine may not print,
or it may not print the data correctly. Please ensure that the value
you enter here matches with the Service name of the machine.