Brother NC9100H - Manual (Page 52)

CONFIGURING INTERNET PRINTING FOR WINDOWS ® 5 - 6
Brother Internet Print: Installing the BIP software
on Windows
®
95/98/Me/2000/XP and Windows
NT
®
4.0
To install the BIP software on a Windows ® 95/98/2000/XP and
Windows NT ® 4.0 PC, execute the following steps:
Setup from CD-ROM
1 Start the CD-ROM installation menu program according to the
Quick Setup guide.
2 Select the proper model and Software Installation menu. Then
select the Network Print Software menu to start the Brother
Network Print Software installation program.
3 Push the Next button in response to the Welcome message.
4 Select the Brother Internet Print button.
5 Select the desired directory to install the BIP files and then push
Next. The installation program will create the directory for you if
it does not already exist.
6 You will then be asked for a port name. Enter the name of the
port. The port name must begin with the BIP and end with a
number, for example, BIP1.
7 You will then see a message about Partial E-mail Print. Partial
E-mail Print is the ability of the Brother Internet Print software to
break down E-mail Print jobs into smaller sections to prevent a
mail file size limitation problem for the mail server.
8 Press OK to continue.
■
Be sure that the PC is running an E-mail program (for
example, Microsoft Outlook) that is capable of sending
E-mail message using Winsock.
■
Be sure that your E-mail server is capable of sending
messages across the Internet.