Brother NC9100H - Manual (Page 100)

FRONT PANEL SETUP MENU 10 - 11
Repeating letters:
If you need to enter a character assigned to the same key as the
previous character, press
move the cursor to the right.
As you enter the E-mail address, it will appear character by character
on the LCD panel.
If you specify more than 16 characters, the LCD panel will scroll the
name to the left, character by character. You can enter up to 60
characters.
Please note that also you can connect to the MFC using a web
browser and specify the E-mail address information through Web
Based Management.
SMTP Server
This field displays the Host Name or IP address of an SMTP mail
server (outgoing E-mail Server) on your network.
(Ex, mailhost.brothermail.net -or- 192.000.000.001)
1 Press Menu , 6 , 2 , 2 .
2 Press or to select Name or IP Address.
3 Enter the SMTP SERVER Address.
4 Press Set .
5 Press Stop/Exit .
POP3 Server
1 Press Menu , 6 , 2 , 3 .
2 Press or to select Name or IP Address.
3 Enter the POP3 Server Address.
4 Press Set .
5 Press Stop/Exit .