Brother NC9100H - Manual (Page 124)

INTERNET FAX (MFC ONLY) 12 - 3
Sending an Internet Fax
Sending an Internet Fax is the same as sending a normal Fax. If you
have already programmed the addresses of the Internet Fax
receivers into the MFC as Speed-Dial locations, you can send the
Internet Fax by loading the document into the MFC, use the Fax
Resolution key to set the preferred resolution and select a Speed-
Dial number and pressing Start.
If you wish to manually enter the Internet Fax Address load the
document into the MFC and press
Shift and 1 simultaneously to
change into the “alphabet” dialling mode.
To manually enter the Internet Fax address, see Manually Entering
Text on this page.
Manually Entering Text
Press Shift and 1 simultaneously to change into the “alphabet”
dialling mode.
You can now use the Dial Pad to dial the E-mail address. Refer to the
following table: Most number keys have three or four letters printed
above them. The keys for 0, #, * don’t have printed letters because
they are used for special characters.
This will differ depending on the whether your MFC contains
Speed-Dial keys or includes Navigator Keys.
Internet Fax specification does not support color resolutions
and files types.