Brother NC9100H - Manual (Page 27)

2 - 1 TCP/IP PRINTING
2
2
TCP/IP Printing
Printing from Windows NT
®
4.0,
Windows
®
2000/XP, LAN Server and
Warp Server
Overview
Users of Windows NT
®
4.0 can print directly to a network-ready
Brother machine using the TCP/IP protocol. Microsoft Windows
NT
® 4.0 users must install Microsoft’s “TCP/IP Printing“ protocol.
Windows ® 2000/XP users are able to send print jobs directly to the
printer without installing any additional software. Brother's print
server also supports transparent printing from IBM LAN Server and
OS/2 Warp Server file servers, as well as from OS/2 Warp Connect
workstations using the TCP/IP protocol.
Quick Tips:
1 The Automatic Private IP Addressing (APIPA) protocol
automatically assigns an IP address from the range:
169.254.1.0 to 169.254.254.255. If you want to disable the
APIPA protocol, set APIPA to Off using the machine control
panel. For more information, see APIPA on page 10-9. If the
APIPA protocol is disabled, the default IP address of a Brother
Print/Fax server is 192.0.0.192. To change it, use the control
panel, the BRAdmin Professional utility, Web BRAdmin
software or let your DHCP server allocate an IP address to the
machine.
2 The default password for Brother Print/Fax servers is access.
3 Windows NT ® 4.0 users must install the Microsoft “TCP/IP
Printing“ protocol.
4 Windows
®
2000/XP users can print using TCP/IP using the
standard Network Printing software and IPP protocol software
built into any Windows
® 2000/XP installation.