Dlc/llc, Net bios/ip, Ethernet – Brother NC9100H User Manual
Page 109: Dlc/llc -20 net bios/ip -20 ethernet -20
10 - 20 FRONT PANEL SETUP MENU
2
Press
or
to select On or Off.
3
Press
Set
.
4
Press
Stop/Exit
.
DLC/LLC
1
(For MFC) Press
Menu
,
6
,
6
,
4
.
(For DCP) Press
Menu
,
4
,
2
,
4
.
2
Press
or
to select On or Off.
3
Press
Set
.
4
Press
Stop/Exit
.
Net BIOS/IP
The NC-9100h Print / Fax Server supports SMB (Server Message
Block) over the TCP/IP protocol via the NetBIOS interface. This
means that just like regular Windows
®
PC's the Brother DCP/MFC
can appear in your network neighborhood. The main advantage of
NetBIOS printing is that you are able to print from legacy DOS
applications that are running on PC’s that are connected to Microsoft
networks.
1
(For MFC) Press
Menu
,
6
,
6
,
5
.
(For DCP) Press
Menu
,
4
,
2
,
5
.
2
Press
or
to select On or Off.
3
Press
Set
.
4
Press
Stop/Exit
.
Ethernet
Ethernet link mode. Auto allows the print server to operate in
100BaseTX full or half duplex, or in 10BaseT half duplex mode by
auto negotiation.
100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and
10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print server
link mode. This change is valid after the print server has been reset.